Germany – Engineering design services for mechanical and electrical installations for buildings – Fritz-Haber-Institut der Max-Planck-Gesellschaft, Berlin Umbau und Erweiterung Gebäude T: HKLS

The Fritz-Haber-Institut (FHI) was founded in 1911 as the Kaiser-Wilhelm-Institut für Physikalische Chemie und Elektrochemie in Berlin-Dahlem and was incorporated into the MPG in 1953. The focus of the research activities is the fundamental understanding of elementary processes in physical chemistry and thus the relationship between structure, reactivity and dynamics at surfaces, interfaces, nanostructures, molecules and clusters. Currently, there is a significant shortage of highly equipped, wet-chemical laboratory areas with a design suitable for automated operation. To meet the demand, building T is to be converted and expanded into a laboratory building. The office cubes arranged on the north side of the hexagonal building and the central hall are to be partially demolished and the technical equipment completely dismantled. The resulting areas, between the two partially demolished cubes, are to have the extension built into the existing building. In this new building, all highly equipped rooms, such as laboratories and hazardous substance stores, as well as most of the central technology and technical services, are to be accommodated on three floors, one of which is a basement. The "core" of the new area is the AI-controlled automated laboratory, which is to be created on the ground floor. On the floor above, wet chemistry laboratories with evaluation workstations are to be created, which can be subdivided into several laboratory rooms. The future building T is to have a NUF of approx. 1,400 m² (approx. 3,370 m² GFA), with the planned usable areas distributed as follows: - 80m² chemistry store, approx. 440 m² each robot-operated AI-supported large chemistry laboratory, approx. 440 m² wet chemistry laboratories, approx. 340 m² office space, approx. 100 m² storage space. For the NUF 7, a space requirement of approx. 100 m² has been determined, for the technical areas approx. 500 m². The estimated total construction costs (KG 200 to 700) for the conversion and extension amount to approx. 22,800,000 € net. During the planning phase, cost estimates are to be prepared, separately for the costs of the extension and the conversion/renovation of the existing building, and to be combined in a total overview. KG 410 - Sewage: The sewer (public sewerage) is located in Van`t-Hoff-Straße and will be introduced into the building section T to be renovated. The relocation or creation of an additional outlet for the extension is to be examined and is part of the measure. The costs (KG 540) are included in KG 410. A separate laboratory wastewater network is to be created in the building. It is assumed that the discharge limits of the public supplier can be complied with without neutralization. - Rainwater: The rainwater must not be discharged and must be allowed to seep away on site. Rainwater retention in the outdoor area is not part of this planning. However, the dimensioning of the roof drainage. The interface is 1m from the building edge. - Water supply systems: The public water supply is from Van`t-Hoff-Straße and will be introduced into the building section T to be renovated. The extension is also to be connected from this water connection. Special note regarding tender questions due to special external events (e.g. Sars-COV-2 or Ukraine war): Please take into account any possible or recognizable impairments in your offer, e.g. with regard to the availability of materials and products, workforce, a possible delayed submission of required evidence, effects on any subcontractors etc. Questions arising in this context, we ask to be submitted in good time before the deadline for submission of the offer via the notification system of the eTendering.