Poland – Mechanical engineering services – RDW w Hrubieszowie. Usługi renowacji rowów
Description
The scope of services includes: RDW in Hrubieszów. Roadside ditch renovation services 1) Task no. 1 - Carry out the renovation of ditches along the provincial road no. 846 2) Task no. 2 - Carry out the renovation of ditches along the provincial road no. 850 2. The reconstruction of ditches along the provincial road no. 846 (task no. 1) and 850 (task no. 2) will be carried out mechanically (including profiling the slopes) in category III soils along with the trimming of raised and the supplementation of lowered verges with an average width of 1.5 m and an average thickness of 0.20 m with disposal and management of the excess spoil by self-loading vehicles (excluding entrances and exits - the entrance and exit of the culvert under the entrance must be cleaned of the earth deposited during excavation) in accordance with the locations given in the scope of the services. Additionally, preparatory tasks such as the removal of road safety equipment from the road verge or other elements, the temporary removal of which will not pose a risk to road safety (such as guardrails, kilometre and hectometre posts, etc.) and their subsequent reinstallation after the service has been completed, must be carried out. 3. The detailed scope of the order is contained in the attached SWZ for each of the tasks in the scope of the works and in the tender cost estimates. 4. The contractor is obligated to ensure safe conditions for both vehicular and pedestrian traffic in the area where the works covered by the contract are being carried out, based on a traffic organisation project (for the duration of the works) approved by the Road Traffic Manager for provincial roads, and transferred to the Contractor. Workers must be dressed in high-visibility vests, and the equipment must have orange flashing warning lights. The services must be carried out in accordance with the applicable environmental protection regulations in a manner that guarantees the required quality. 5. It is essential that before submitting a tender, the contractor familiarises themselves with the service delivery location in order to assess the actual condition, documents, and information relating to this procedure, particularly the locations where the renovation is to be carried out. 6. The ordering party reserves the right to check the correctness of the marking of the service being carried out, in accordance with the traffic organisation project, as mentioned in point 5. 7. The contractor provides all the necessary materials, equipment, and personnel required to complete the order. 8. The detailed scope of the services is outlined in the attached Scope of Works and Technical Specification. 9. The contractor undertakes to conclude, at their own expense, appropriate insurance agreements for civil liability for the duration of the order. 10. The insurance covers contractual and tortious civil liability for damages and consequences of accidents involving workers and third parties, arising in connection with the services provided - the required insurance sum is not less than 50,000 PLN per incident. 11. Copies of the insurance policies or insurance documents confirmed to be in agreement with the original, the Contractor shall submit to the ordering party for review no later than on the day of handover of the order execution site and subsequently upon each request of the ordering party. Any delay in this regard will be treated as having arisen from causes dependent on the contractor and cannot be the basis for changing the order completion date. 12. In accordance with art. 95(1) of the Pzp Act, the ordering party requires the contractor or subcontractor to employ, under an employment contract, persons performing the following tasks: drivers of transport equipment, equipment operators, and persons cleaning the surface within the scope of the order. 13. The ordering party allows for the possibility of submitting partial tenders in accordance with the description of the subject of the order. 14. There is a possibility of invalidating the procedure as a result of the non-granting of funds for the financing of the order. In accordance with art. 257 of the Pzp Act, the ordering party may invalidate the procedure for awarding the order if the public funds, which the ordering party intended to allocate for the financing of the whole or part of the order, have not been granted to it, and the possibility of invalidating the procedure on this basis has been provided for in the order announcement.
CPV codes
Documents & submission
Contains data from Tenders Electronic Daily (TED), © European Union, ted.europa.eu — CC BY 4.0.
Related tenders
Poland – Architectural, construction, engineering and inspection services – "Pełnienie nadzoru inżynierskiego nad realizacją projektu wykonawczego branży srk oraz kompleksowych robót budowlanych na linii kolejowej nr 622 na odcinku G Gdów-Szczyrzyc" w ramach Projektu pn.” Budowa nowej linii kolejowej Podłęże-Szczyrzyc-Tymbark/Mszana Dolna oraz modernizacja istniejącej linii kolejowej nr 104 Chabówka-Nowy Sącz – Etap II
PKP Polskie Linie Kolejowe S.A.PolandArchitectural, construction, engineering and inspection servicesConstruction supervision servicesSupervision of building workDeadline in 11 daysPublished on Nov 19, 2026
Poland – Engineering design services – Opracowanie koncepcji wraz z kompletnymi materiałami do wydania Decyzji o Środowiskowych Uwarunkowaniach dla zadania pn. „Budowa wiaduktu nad linią kolejową nr 009 w Iławie w ciągu dk nr 16”
Generalna Dyrekcja Dróg Krajowych i Autostrad Oddział w OlsztyniePolandEngineering design servicesDeadline in 47 daysPublished on Nov 19, 2026
Poland – Architectural services for buildings – KWP Katowice – modernizacja budynków A, B, C, etap I z przystosowaniem do przepisów przeciwpożarowych budynków KWP w Katowicach przy ul. Lompy 19
Komenda Wojewódzka Policji w KatowicachPolandArchitectural services for buildingsEngineering design servicesDeadline in 8 daysPublished on Nov 19, 2026
Poland – Engineering-design services for traffic installations – Opracowanie projektu wykonawczego na budowę sygnalizacji świetlnej wraz z pełnieniem nadzoru autorskiego
Zarząd Dróg Miejskich w WarszawiePolandEngineering-design services for traffic installationsSupervision of building workDeadline in 30 daysPublished on Nov 19, 2026