Hungary – Construction work for school buildings – Gödöllői Református Líceum tornaterem kivitelezése

The contractor's task is to construct the "C" marked sports hall at the property located at 2100 Gödöllő, Szabadság tér 9., hrsz. 401. Construction organisation: The construction traffic, the service of the investment takes place from Kossuth u 5-7. Extension area: 33,50m x 30 m, ground floor + floor + attic. Built-up area: 1002,97 m2. Useful area: 1539,24 m2. Foundation: well foundations, with head beams. Superstructure: prefabricated reinforced concrete columns and beams, 30cm thick Silka HML 300 NF+GT lime-sand brick infill walls. Roof structure: 5.0 cm concrete walkway (40x40x5 cm in size) 1 layer 1.8 mm thick, mechanically fixed, UV- and weather-resistant (MSZ EN 13956), polyester reinforced, multilayer, special quality PVC waterproofing (e.g.: SikaPlan G-18), loosely laid, with 5 cm overlaps, surface-continuously welded (at least 3 cm hot air) (white - RAL 9016) 1 layer 120 g/m2 surface weight plastic film separating layer, loosely laid with 15 cm overlaps (S-Glass Fleece 120) 8 cm inhomogeneous rock wool insulation board (Rockwool Durock) 18 cm homogeneous rock wool insulation board (Rockwool Roofrock 60) 1 layer 0.6 mm vtg. self-adhesive composite aluminium foil, vapour barrier, (e.g.: RW Bautech Alutrix 600) 15.3 cm T153 galvanised steel trapezoidal sheet roofing (Structural Design), Rockwool SF 50 acoustic infill element statically dimensioned prefabricated reinforced concrete beam 5 cm two-layer, composite (rock wool core + /Heraklith/ fibreboard covering layer) panel acoustic ceiling cladding (Tektalan A2 037/ Claddings: Graboplast StrongAir sports parquet, multilayer parquet according to EN 13849, 5.2 mm thick hardwood surface layer, changing rooms, traffic: cold floor covering. Exterior wall cladding: double standing seam 0.7 mm thick, coil-coated aluminium sheet cladding (e.g. Prefalz system) cornice spacing: 600-150 mm, - RAL 7005 - light grey colour, 15 cm black glass fibre casing, fully cross-sectionally hydrophobised rock wool insulation Matrix premium facade cladding. Mechanical engineering: Heating: Changing rooms: 2 x HOVAL Baleria (20) outdoor, HOVAL indoor heat pump - cooling - heating, split system, air-water heat pump (inverter) each 9kW, floor heating Sports hall: 2 x Roof-top type compact air handling units, each with a delivered air volume of V=6000 m3/h, Dp st= 200 Pa, with heat recovery. Control automation connected to the control of the completed D building. The detailed technical documentation is included in the technical description, procurement documentation, contract draft and cost estimate without prices, which are part of the procurement documents. Sports technology option: Ball-catching net 3.00 x 4.80 6 x Metalobox two-sided backrest changing bench 1600x2000x740 16 x Metalobox one-sided backrest changing bench 1600x1500x360 12 x Metalobox one-sided backrest changing bench 1600x2000x360 4 x Metalobox changing bench 450x1500x330 2 x Metalobox changing bench 450x1000x330 2 x Metalobox changing cabinet 800x1200x500 2 x Metalobox changing cabinet 800x900x500 2 x Metalobox changing cabinet 800x600x500 2 x Building automation option: TERAPI EQUIPMENT • Outdoor temperature sensor | 1 x • water temperature sensor, 24 x • pressure switch 3 x • submersible/contact boundary thermostat 2 x DDC SUBSTATIONS • EA1 Heat central distribution to be installed 1 x BUILDING MANAGEMENT CENTRE • building management software package 1 x • management PC 1 klt Installation of UV standing pipe in existing outdoor cable support structure, complete 30 fm indoor cable support structure, RKS100*60mm perforated metal cable tray, complete with structure 20 fm MÜII protective conduit with cable ties, complete for field devices 150 fm YSLY-Jz 3x1,5 mm2 cable laying complete 700 fm J-Y(St)Y 2x2x0,8 mm2 control cable laying complete 1000 fm LiYCY 3x1mm2 control cable laying complete 600 fm both sides cable connection 1 klt KKMO field interlocking switch for pumps, equipment and connection 23 x electrical pipe heating 30W/m 50 m EPH design in machine room 1 klt • MCC1 building heat central strong current automation distribution cabinet 1 x Switch and automation cabinet system-specific design manufacturing drawings 1 klt DDC substation distribution, series terminal diagrams, cable lists 1 klt DDC substation and centre user programs 1 klt Graphic schematics, dynamic 1 klt DDC substation commissioning, adjustment, test runs 1 klt Operator training 1 klt Completion documentation 1 klt Project management, organisational costs 1 klt EV measurement, log 1 klt The exact quantities are contained in the cost estimate without prices, which is the guiding document.